Storage of the results

Storage of the results

Ver: 1

DESCRIPTION

Allows to specify how to store the results. In order to save time and memory, it is important to be cautious when
defining the parameters of this menu : generally, it is useless to store too many intermediate points along a given trajectory.
Moreover, about 1000 trajectories (the default, in this menu : total number of trajectories to calculate = NBFILE * NBPTMX)
are enough to perform a statistical analysis. OPTIONS

-1
Upper level menu

1
Modification of PREFIX

Prefix of the results files. Default value is 'mixing'

2
Modification of NBFILE

Number of the results files. Default value is 10

3'
The result files are not formatted

When activated, cause to write unformatted result files. By default, the result files are formatted

3''
The result files are formatted

Complementary option to option 3'. When activated, cause to write formatted result files

4
Modification of NBPTMX

Maximum number of trajectories in a single result file. Default value is 100

5
Modification of CPUMAX

Maximum CPU time (in hours) to generate a single result file. Default value is 4

6
Storage of all the points of the trajectories

Allows to store all the points along particle paths

7
Storage at each time step (exactly)

Allows to store points at time steps equal to the time intervals specified in option 11

8
Storage after each time step (minimum)

Alternative option to option 7. Allows to store points at time steps greater or equal to the time intervals specified in option 11

9
Storage at each displacement (exactly)

Allows to store points at displacements equal to the displacements specified in option 11

10
Storage after each displacement (minimum)

Alternative option to option 9. Allows to store points at displacements greater or equal to the displacements specified in option 11

11'
Modification of the time step

Allows to modify the time step. Available when option 7 or 8 has been selected

11''
Modification of the displacement

Allows to modify the displacement. Available when option 9 or 10 has been selected.

SEE ALSO

storage of the results (MUM)

-1	Upper level menu
1	Modification of PREFIX
	Prefix of the results files. Default value is 'mixing'
2	Modification of NBFILE
	Number of the results files. Default value is 10
3'	The result files are not formatted
	When activated, cause to write unformatted result files. By default, the result files are formatted
3''	The result files are formatted
	Complementary option to option 3'. When activated, cause to write formatted result files
4	Modification of NBPTMX
	Maximum number of trajectories in a single result file. Default value is 100
5	Modification of CPUMAX
	Maximum CPU time (in hours) to generate a single result file. Default value is 4
6	Storage of all the points of the trajectories
	Allows to store all the points along particle paths
7	Storage at each time step (exactly)
	Allows to store points at time steps equal to the time intervals specified in option 11
8	Storage after each time step (minimum)
	Alternative option to option 7. Allows to store points at time steps greater or equal to the time intervals specified in option 11
9	Storage at each displacement (exactly)
	Allows to store points at displacements equal to the displacements specified in option 11
10	Storage after each displacement (minimum)
	Alternative option to option 9. Allows to store points at displacements greater or equal to the displacements specified in option 11
11'	Modification of the time step
	Allows to modify the time step. Available when option 7 or 8 has been selected
11''	Modification of the displacement
	Allows to modify the displacement. Available when option 9 or 10 has been selected.